Adding a home battery is one of the bigger decisions a solar household makes, and the two questions that matter most are simple: what size battery do I actually need, and is it worth it? This free solar battery calculator gives you an independent starting estimate for both — the battery size that fits your home, the savings it could deliver each year, and roughly how long it takes to pay for itself.
Built for Australian homes, it works as a solar savings calculator too — estimating your yearly bill savings, payback period and the federal battery rebate from your own numbers. Unlike a generic solar calculator, it’s tuned to Australian tariffs, feed-in rates and battery prices.
Move the sliders to match your own electricity use, solar system and tariff. Nothing is saved or sent anywhere — it all runs in your browser.
How this solar battery & savings calculator works
This solar battery calculator combines your daily electricity use, solar system size and tariff to estimate three things at once: the battery capacity that suits your home, your likely yearly savings, and how long it takes to pay for itself. As a solar savings calculator it also factors in the federal battery rebate and optional VPP income, so the figures reflect what an Australian household would actually see.
What size solar battery do I need?
There is no single right answer — the ideal battery size depends on two things working together: how much electricity you use after the sun goes down, and how much surplus solar you have left over during the day to charge it.
A battery only helps if it can both fill up (from spare daytime solar) and empty out (into your evening and overnight use). Size it too small and you will still buy power from the grid most nights; size it too big and the extra capacity sits half-empty, so you have paid for storage you never fill. For most Australian homes with a typical solar system, the sweet spot lands somewhere between about 5 and 15 kWh.
The calculator does this balancing act for you: it works out your likely evening load, checks how much surplus solar you would have to charge with, and recommends the size that puts the most stored energy to work. For a deeper walkthrough, see our solar battery size guide.
How much does a solar battery save?
A battery saves money by changing what happens to your surplus solar. Without one, spare daytime power is exported to the grid for a small feed-in tariff — often only a few cents per kWh. With a battery, that same energy is stored and used in the evening instead, so you avoid buying it back at your much higher grid rate.
So your savings come down to one thing above all: the gap between your grid electricity rate and your feed-in tariff. The wider that gap, the more every stored kilowatt-hour is worth. High evening usage and a solar system big enough to leave a healthy daytime surplus both push savings up too. You can see how much each of these matters by dragging the sliders. To compare specific products, see our guide to the best solar batteries in Australia.
How long until a battery pays for itself?
Payback is simply the installed cost divided by your yearly savings. For most Australian households right now, home batteries pay back over roughly 10 to 15 years — and it is worth being clear-eyed about that. Batteries are still a considerable investment, and many people add one for backup power during outages and day-to-day energy independence as much as for the pure dollar return.
The good news is that several things shorten the payback, and the calculator lets you test each one: the federal Cheaper Home Batteries rebate cuts the up-front cost, joining a Virtual Power Plant can add income on top of your savings, and a higher grid rate or a bigger gap to your feed-in tariff both speed things up. The honest way to find your real number is to get a few quotes from accredited installers.
Why are some batteries advertised for a fraction of this price?
If you have seen a “28 kWh battery for $4,000” ad and wondered why our numbers are so much higher, you are not comparing the same thing. A price like that works out to around $140 per kWh, roughly a third of what even the cheapest legitimate battery hardware costs before it is installed. It almost always points to one of two things.
A raw battery module, not a home battery system. These are just the storage cells and a battery management system in a box — no hybrid inverter, no installation, and usually no listing on the Clean Energy Council’s approved products list. To turn one into a working, grid-connected home battery you would add a compatible inverter and accredited installation, which brings the real cost straight back up. And because it is not an approved product fitted by an accredited team, it cannot legally connect to the grid under the rebate — so you would also forfeit the federal discount worth roughly $250 per usable kWh.
Or a misleading advertisement. “Government battery scheme — batteries from $X” ads on social media and marketplaces are a common trap: bait-and-switch offers, or grey-market imports with no Australian warranty or local support.
Either way, the same checks sort the real deals from the noise. Does the price include a hybrid inverter and professional installation? Is the battery on the CEC approved products list? What is the warranty, and is it backed by an Australian entity you could actually call? And is the headline capacity usable or merely nominal? There is a safety dimension too: home batteries are high-energy devices, and grey-market gear fitted outside the accredited system carries real fire, insurance and compliance risks. The reliable way to compare is the one this calculator uses — dollars per usable kWh, fully installed by an accredited installer. For the products worth shortlisting, see our guide to the best solar batteries in Australia.
What makes a battery save more?
The households that get the most out of a battery tend to share a few things: a large gap between their grid rate and feed-in tariff, plenty of electricity used in the evening and overnight, a solar system big enough to leave surplus after daytime use, and — increasingly — participation in a VPP. If most of your power is used during the day while your solar is already covering it, a battery has less work to do, and the numbers get harder to justify.
Frequently asked questions
Is a bigger battery always better?
No. A battery is only useful for the energy it can both store and discharge each day. Once it is big enough to soak up your daytime surplus and cover your evenings, extra capacity just adds cost without adding savings. The calculator caps its recommendation at the point where a bigger battery would stop filling up.
Why are some batteries advertised so cheaply?
A price far below about $700–$1,000 per usable kWh installed almost always means a battery-only module — no inverter or installation — or a misleading ad, not a complete, approved, grid-connected system. Once you add the inverter, accredited installation and compliance, the cost returns to normal, and non-approved products cannot claim the federal rebate or legally connect to the grid.
Can I use a battery without solar panels?
You can, but the savings work differently — instead of storing free surplus solar, you would charge from the grid during cheap off-peak periods and use it during expensive peak times. The returns are usually smaller and depend on having a time-of-use tariff. We cover this in can you get a battery without solar.
Does the federal battery rebate change these numbers?
Yes — significantly. The Cheaper Home Batteries program reduces the up-front installed cost, which directly shortens your payback. The calculator’s “installed cost” figure is meant to reflect the price after that rebate; see our guide to the battery rebate for current eligibility.
How accurate is this calculator?
It is a considered estimate, not a quote. It uses simplified, transparent assumptions and cannot know your exact usage pattern, roof, or tariff. Treat the result as a realistic starting point, then get quotes to confirm your real numbers.
What is a VPP, and does it improve payback?
A Virtual Power Plant lets your retailer draw on your battery at times of high grid demand, paying you for the energy. It can add a useful income stream on top of your storage savings and meaningfully shorten payback — though it does mean sharing control of your battery at times. More in our guide to Virtual Power Plants.
