Solar Panels Not Producing Enough Power? 8 Common Causes in 2026
If your solar system isn’t generating as much electricity as you expected, you’re not alone — underperforming solar is one of the most common complaints from Australian homeowners. The good news is that most causes are identifiable and often fixable. Here are the eight most common reasons and what to do about each.
1. Shading You Didn’t Notice
The most common cause of underperformance. Trees grow, neighbours build extensions, and shadows that weren’t there at installation appear over time. Even partial shading of one panel can disproportionately reduce output across a whole string, depending on your inverter type. Check your panels at different times of day for new shadows. Solutions include trimming trees, or adding microinverters/optimisers to isolate shaded panels.
2. Dirty Panels
Dust, bird droppings, pollen, or salt film reduce output by 3–7%. See our guide on solar panel cleaning to determine whether cleaning is worthwhile for your situation.
3. Inverter Issues
The inverter is the component most likely to fail. If your system has stopped generating entirely or is producing far below expectation, check the inverter’s status lights and display. A fault code, error light, or blank display indicates an inverter problem. Contact your installer — inverters are typically warranted for 10 years.
4. Seasonal Variation
Solar output naturally drops in winter — shorter days, lower sun angle, and more cloud. A system generating 30 kWh/day in summer might produce 15 kWh/day in winter. This is normal, not a fault. Compare your output to the same month last year, not to summer peaks.
5. Hot Weather
Counterintuitively, extreme heat reduces solar panel efficiency. Panels are rated at 25°C — on a 40°C day with roof temperatures of 65°C, output can drop 10–15% depending on the panel’s temperature coefficient. This is why N-type panels with better temperature coefficients perform better in Australian summers.
6. System Undersized for Your Usage
Sometimes the system isn’t underperforming — it’s just too small for your consumption. If your usage has increased (new appliances, EV, working from home), your existing system may no longer cover your needs. See our guide on how many solar panels you need to check whether your system is correctly sized.
7. Faulty or Degraded Panels
Panels degrade slowly (0.25–0.5%/year) but occasionally a panel fails or develops a fault. If your monitoring shows one string or section consistently underperforming, a faulty panel may be the cause. Your installer can test individual panels — most carry 25-year performance warranties.
8. Incorrect Installation or Configuration
Occasionally the problem dates back to installation — panels wired incorrectly, suboptimal orientation, or inverter settings not optimised. If your system has underperformed since day one, this is worth investigating. A quality installer will review and correct configuration issues.
How to Diagnose the Problem
Start with your monitoring app. Compare current output to expected output for the season and to previous years. Note whether the drop is sudden (suggests inverter or fault) or gradual (suggests shading, dirt, or degradation). Check panels visually for shading and dirt. If the cause isn’t obvious, contact your installer for a system health check.
Frequently Asked Questions
How much should my solar system generate per day?
A 6.6 kW system generates roughly 23–29 kWh/day depending on your city and season. See our 6.6kW system guide for detailed output figures by location.
Is it normal for solar output to drop in winter?
Yes — winter output can be 40–50% lower than summer due to shorter days and lower sun angles. This is expected, not a fault.
Information reflects general guidance as at September 2026. For persistent underperformance, always consult your accredited installer.
